In Building Repeater Band Selective Repeater Channel Selective Repeater Frequency Conversion Reoeater RF Distribution Repeater Fiber Optical Repeater RF Optical Repeater Optical Distribution System LNA Single Type Half Type Full Balance Type RSSI in Type Through Type Up Down Converler Home Booster RF Combined Module RF&Optic Combined Module MASTER SLAVE      HOME ▷ 제품소개 ▷ In Building Repeater   In Building Repeater Compact Size  ALC Function Shut-Down Function  Superior Performance  Low Power Consumption Electrical Specification Parameters Standards Remark Frequency All Wireless System band CELLULAR, GSM, DCS, PCS, WCDMA Bandwidth Customize Acceptable   GAIN 60 dB   GAIN FLATNESS ±1.5dB   V.S.W.R. 1.5 : 1   Input Power Range -104 ~ -40 dBm   Max. Output Power 0dBm( 1mW ) @Total Output Power IMD CDMA:＜ -15 dBm GSM:＜ -36 dBm DCS:＜ -30 dBm @Max Output Power Spurious CDMA ＜ -45dBc/30KHz @ fc ± 750KHz ＜ -60dBc/30KHz @ fc ± 1.98MHz GSM Meet ETSI Standard @Max Output Power Noise Figure CDMA :＜5dB GSM : ＜6dB   Impedance 50Ω   Group Delay 2㎲   Power Supply AC : 110~220V, 50~60Hz Operating Voltage @DC Adaptor(2.0A Max) Control Options Specification Parameters Standards Remark AGC,ALC RANGE 20dB   Gain Control Type Not Used   Step Attenuation DC Power Alarm Shut Down Alarm   NMS Not Used   Physical Specification Parameters Standards Remark In/Out Connector N Type Female   Weight ≤ 2 ㎏ Step Attenuation DC Power Alarm Shut Down Alarm   Dimension (W×H×D) 140 × 163 × 45 mm Environmental Specification Parameters Standards Remark Operating Temperature -10 ~ +55 ℃ Relative Humidity 10 ~ 90 ％ Enclosure Protection Full Protection Against Dust Insertion   The enclosure shall have no damage or degradation and the electrical specifications shall be maintained under above conditions. Customer design and specifications are available.