In Building Repeater Band Selective Repeater Channel Selective Repeater Frequency Conversion Reoeater RF Distribution Repeater Fiber Optical Repeater RF Optical Repeater Optical Distribution System LNA Single Type Half Type Full Balance Type RSSI in Type Through Type Up Down Converler Home Booster RF&Optic Combined Module MASTER SLAVE      HOME ▷ PRODUCTS ▷ Frequency Conversion Repeater   Frequency Conversion Repeater  Long Distance Transmission  High Isolation  Low Noise Figure  Superior Performance  Low Power Consumption Electrical Specification Parameters Standards Remark Frequency Operating Frequency, Converting Frequency CELLULAR, GSM, DCS, PCS, WCDMA Bandwidth Customize Acceptable   GAIN 80 dB   GAIN FLATNESS ±1.5dB   V.S.W.R. 1.5 : 1   Input Power Range -104 ~ -40 dBm   Max. Output Power 33dBm( 2W ) @Total Output Power IMD CDMA:＜ -15 dBm GSM:＜ -36 dBm DCS:＜ -30 dBm @Max Output Power Spurious CDMA ＜ -45dBc/30KHz @ fc ± 750KHz ＜ -60dBc/30KHz @ fc ± 1.98MHz GSM Meet ETSI Standard   Noise Figure CDMA :＜5dB GSM : ＜6dB   Impedance 50Ω   Group Delay 5㎲   Power Supply AC : 110~220V, 50~60Hz Operating Voltage @DC Adaptor(2.0A Max) Control Options Specification Parameters Standards Remark AGC,ALC RANGE 30dB   Gain Control Type 30 Step ATT./1dB Step   Step Attenuation PLL (UNLOCK), LNA, HPA AC/DC, DOOR OPEN / CLOSE   NMS Available   Physical Specification Parameters Standards Remark In/Out Connector N Type Female   Weight ≤ 15 ㎏ Dimension (W×H×D) 345 × 380 × 125 mm Environmental Specification Parameters Standards Remark Operating Temperature -30 ~ +60 ℃ Relative Humidity 95 ％ Enclosure Protection Full Protection Against Dust Insertion   The enclosure shall have no damage or degradation and the electrical specifications shall be maintained under above conditions. Customer design and specifications are available.